Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 370

(A) (1) (B) (2) 4 FACSIMILE BACK OK Specify the original size. (1) Enter the original size. • Select the [X] key and enter the horizontal dimension (X) of the original with the keys. • Select the [Y] key and enter the vertical dimension (Y) of the original with the keys. (A) To return the original size to the default size, select the [Size Reset] key. (B) To have the image automatically enlarged or reduced to the send size, select the [Fit to Send Size] checkbox . The checkbox does not need to be selected if you wish to scan at the entered original size. (2) Select the [Basic Menu] key. Y X • The send size is automatically selected based on the original size you entered. • After selecting card scan, you can change the scan size and the send size from the [Scan Size] key and [Send Size] key in the base screen. In this case, the screen of this step will appear in the scan size setting screen. For the procedure for setting the send size, see "Specifying the send size of the original" (page 4-54). Press the [BLACK & WHITE START] key to scan the front of the card. 5 To cancel scanning... Press the [STOP] key ( ). Turn the card over so that the back is face down, and press the [BLACK & WHITE START] key to scan the back of the card. 6 Before scanning the back of the card, you can select the [Configure] key in the display to change the exposure. To cancel scanning... Press the [STOP] key ( ). 4-77 Contents