Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 547
Select image settings and any other
View all Sharp DX-C310FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 547 highlights
SCANNER/INTERNET FAX 4 User ID Value 1 Value 3 Value 5 Value 7 Value 9 Value 11 (1) Value 2 Value 4 Value 6 Value 8 Value 10 Value 12 (2) BACK OK Enter the selected metadata item. (1) Select the key of the value that you wish to enter. • When the entry values of the metadata item are in the form of selections, the selections are shown as keys. When a value is editable, you can select the [Direct Entry] key to manually enter the value. • If the metadata item requires the entry of text, a text entry screen will appear. Enter the required information. (2) Select the [OK] key. • To change the number of items shown at once in the screen, select the [Change the Number of Displayed Items] key. The number of items changes from 6 to 12 to 18 each time you press the [OK] key. • For the procedure for entering text, see "ENTERING TEXT" (page 1-61) in "1. BEFORE USING THE MACHINE". 5 Set Name: Metadata 1 User ID Value 1 From Name Reply To xxx xxx [email protected] DocumentPassword AccessPassword BillCode1 xxx xxx xxxxxx xxxxxx BACK OK When you have finished entering all items, select the [OK] key. 6 Color Mode Select image settings and any other settings, and perform the scan send procedure. • The procedures for selecting settings and performing transmission are the same as in the other modes. • To make changes to entered values, select the [Metadata Entry] key once again. The entry screen of the selected metadata set will appear. • Transmission cannot be performed if the [Data Entry] tab is displayed and no metadata settings have been configured. To perform transmission without sending metadata, switch to a different mode and then perform transmission. • Before configuring metadata settings, you can specify addresses in all modes to be used. After metadata settings have been configured, only addresses in modes that are allowed in the selected metadata set can be specified. • When metadata settings have been configured or an address is specified in the [Data Entry] tab, it will not be possible to switch to another mode. 5-125 Contents