Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 651
Recall in Case of Communication Error
View all Sharp DX-C310FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 651 highlights
Fax Send Settings Settings for fax transmission can be configured. Rotation Sending Setting When transmitting an image that is one of the following sizes, this function rotates the image counterclockwise 90 degrees. (The setting can be configured separately for each size.) 5-1/2" x 8-1/2", B5, A5 Quick On Line Sending When this setting is enabled, the machine starts transmitting a fax as soon as the first page is scanned. Transmission takes place at the same time as the remaining pages are being scanned. If you disable this setting, transmission will not begin until all pages have been scanned. Note that this setting does not apply to manual transmission. Printing Page Number at Receiver This setting is used to add the page number to the top of each fax page printed by the receiving machine. Date/Own Number Print Position Setting This setting determines the position of the date and sender information printed at the top of faxes by the receiving machine. To have the information printed outside the transmitted document image, select the [Outside the Original Image] key. To have the information printed inside the document image, select [Inside the Original Image] key. For more information on the print position, see "ADDING YOUR SENDER INFORMATION TO FAXES (Own number sending)" (page 4-89) in "4. FACSIMILE". SYSTEM SETTINGS OPERATION PANEL - FAX (ADMINISTRATOR) Recall in Case of Line Busy This program is used to set the number of recall attempts and the interval between recall attempts when a transmission is not successful due to the line being busy or other reason. Number of Times to Recall When Line is Busy This setting specifies whether or not recalling is performed when the line is busy. When recalling is performed, you can set the number of recall attempts. Any number from 1 to 14 can be selected. Interval to Wait Between Recall Attempts (min.) When Line is Busy The interval between recall attempts can be set. Any number of minutes 1 to 15 can be selected. Even when this setting is enabled, note that your machine will not re-attempt a call when manual transmission or direct transmission is used. Recall in Case of Communication Error Settings can be configured for automatic resending of faxes when transmission fails due to a communication error. Number of Times to Recall in Case of Error This setting determines whether to re-attempt once or not when a communication error occurs. Interval to Wait Between Recall Attempts (min.) in Case of Error The interval between recall attempts can be set. Any number of minutes 1 to 15 can be selected. When this setting is enabled, note that your machine will not re-attempt a call when manual transmission or direct transmission is used. Initial Transmission Speed Setting The transmission speed can be set for all originals. If you find that communication errors frequently occur with the currently set transmission speed, gradually decrease the speed in the following order setting until errors do not occur. 33.6kbps, 14.4kbps, 9.6kbps, 4.8kbps 6-103 Contents