Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 150

COPIER ADDING MARGINS (Margin Shift) This function is used to shift the copy image right, left, up or down to adjust the margin. This is convenient when you wish to hole punch the copies. Shifting the image to the right so the copies can be bound at the left edge with a string Not using margin shift Using margin shift 1 1 1 1 The punch holes cut off The image is moved to part of the image allow space for the holes so the image is not cut off. Keys in the display can be selected with the arrow keys and the [OK] key. Place the original. 1 Place the original face up in the document feeder tray, or face down on the document glass. After placing the original, specify the original size. ☞ ORIGINAL SIZES (page 2-28) Select the special modes. 2 (1) Select the [Special Modes] key. (2) Select the [Margin Shift] key. ☞ Special modes menu (1st screen) (page 2-39) (1) 3 (2) BACK OK BACK OK Set the margin shift. (1) Select the margin shift position. Select one of the 4 positions. (2) Set the amount of the margin shift. Select either of the keys with the keys and press the [OK] key repeatedly to change the number. 0" to 1" (0 mm to 20 mm) can be entered. (3) Select the [Basic Menu] key. You will return to the base screen of copy mode. (3) 2-50 Contents