Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 418

FACSIMILE CHECKING COMPLETED JOBS You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on completed broadcast transmission jobs, received fax forwarding jobs and serial polling jobs. Select the key of the desired job in the completed jobs screen and select the [Detail] key. The job detail screen (see below) will appear. The job name appears at the top of the job detail screen. To view details on the job, select either of the keys with the information appears on each screen. keys and press the [OK] key. The following Tab name Information displayed Failed This shows information on destinations for which communication failed. A broadcast control number (3-digits) appears in front of each destination. Address: The name or fax number of each destination. Start time: Time at which communication began. Status: Description of failure (error) The [Retry] key can be selected to re-attempt transmission to that destination.* All Destinations Shows all addresses specified in the job. A broadcast control number (3-digits) appears in front of each destination. Address: The name or fax number of each destination. Start time: Time at which communication began. Status: Communication result The [Retry] key can be selected to transmit to all destinations again.* * Recalling is not possible for a broadcast transmission that includes a Scan to FTP address, Scan to Network Folder address, or Scan to Desktop address. 4-125 Contents