Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 521

SCANNER/INTERNET FAX (1) (2) Select print conditions. BACK OK (1) Select the print conditions. (2) Select the [Basic Menu] key. 4 • The print conditions for a transaction report are as follows: "Always Print": A transaction report is printed no matter whether the transmission succeeds or fails. "Print at Error": A transaction report is printed when transmission fails. "Do not Print": Do not print a transaction report. • When the [Print Original Image] checkbox is selected , part of the transmitted original is included on the transaction report. Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. 5 When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have been scanned and then select the [Read-End] key. A beep will sound to indicate that scanning is finished. To cancel scanning... Press the [STOP] key ( ) to cancel the operation. For a broadcast transmission, changes to the transaction report print conditions apply to all destinations. To cancel the transaction report setting... Select the [Cancel] key in the screen of step 4. • System Settings (Administrator): Transaction Report Print Select Setting (Web page only) This is used to set the conditions for printing transaction reports. The factory default setting is . Single Sending: Print Out All Report/ Print Out Error Report Only /No Printed Report Broadcasting: Print Out All Report /Print Out Error Report Only/No Printed Report Receiving: Print Out All Report/Print Out Error Report Only/ No Printed Report • System Settings (Administrator): Original Print on Transaction Report (Web page only) This is used to have part of the transmitted original printed on the transaction report. 5-99 Contents