Singer SE300 Legacy Instruction Manual and Troubleshooting Guide - Page 12
Hread, Utter, Ressure, Egulator, Ounting, Achine, Ewing, Abinet
View all Singer SE300 Legacy manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
SETTING UP THE MACHINE THREAD CUTTER (I) Use this cutter if the Thread Cutter button is not used. 1. Raise the presser foot and bring fabric and threads backward after sewing. 2. Hook the threads to the thread cutter from back to front. 3. Pull the thread tails to cut the threads. PRESSURE REGULATOR (J) The correct presser foot pressure allows fabrics to feed properly while sewing. The setting of the presser foot pressure is determined mainly by the weight of the fabric being sewn. )RUOLJKWZHLJKWIDEULFVVXFKDVVKHHUVEDWLVWHYRLOHHWFWKH SUHVVXUHLVGHFUHDVHG)RUKHDY\ZHLJKWIDEULFVOLNHGHQLPRU canvas, the pressure in increased. To increase the pressure, turn dial to 5. To decrease the pressure, turn dial to 1. )RUPRVWIDEULFVWXUQGLDOWR1 DROP FEED LEVER (M) The feed dogs project up through the needle plate, directly below the presser foot. Their function is to move the fabric ZKLOHLWLVEHLQJVHZQ7KH'URS)HHG/HYHUORFDWHGRQWKH back of the free arm controls the feed dogs. )RURUGLQDU\VHZLQJPRYHWKHOHYHUWRWKHULJKW7KLVUDLVHV IHHGGRJVWRWKHLUKLJKHVWSRVLWLRQ)RUPRVWVHZLQJWKHOHYHU should be in this position. )RUGDUQLQJRUIUHHPRWLRQHPEURLGHU\RUZKHQHYHUIDEULFLVWR be moved by hand, move the lever to the left to lower the feed dogs. NOTE: After sewing with the feed dogs lowered, push the Drop )HHG/HYHUEDFNWRWKHULJKWWRUHVXPHVHZLQJZLWKIHHG dogs engaged. Push the lever to the right and then turn the handwheel toward you one full revolution. This will re-engage the feed dogs. M TOP COVER (K) To open the top cover, lift up the front right side of the cover. HAND WHEEL (L) %\WXUQLQJWKHKDQGZKHHOWKHQHHGOHZLOOUDLVHRUORZHU