Singer SE300 Legacy Instruction Manual and Troubleshooting Guide - Page 56
Caution, Danger
View all Singer SE300 Legacy manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
MAINTENANCE DANGER To reduce the risk of electric shock, disconnect the SRZHUOLQHSOXJIURPWKHHOHFWULFRXWOHWEHIRUHFDUU\LQJ RXWDQ\PDLQWHQDQFH 3. Lift up the bobbin holder and remove it. CAUTION 7RSUHYHQWDFFLGHQWVGRQRWWRXFKWKHWKUHDGFXWWHU XQLWD CLEANING If lint and bits of thread accumulate in the hook, this will interfere with the smooth operation of the machine. Check regularly and clean the stitching mechanism as needed. 4. Clean the hook race, feed dogs and bobbin holder with a brush. Also clean them, using a soft, dry cloth. 3 D 4 NOTE: * An LED lamp is used to illuminate the stitching area. It does QRWUHTXLUHUHSODFHPHQW,QWKHXQOLNHO\HYHQWLWGRHVQRW OLJKWXSFDOO\RXUDXWKRUL]HG6,1*(5UHWDLOHUIRUVHUYLFH * There is no need to lubricate this machine. BOBBIN HOLDER Remove the bobbin cover and bobbin. Clean the bobbin holder with a brush. 5. Replace the bobbin holder into the hook race so that the tip E ¿WVWRWKHVWRSSHUF DVVKRZQ 6. Replace the needle plate inserting the hook into the machine. Replace the screws and tighten. HOOK RACE AND FEED DOG 1. Remove the needle, presser foot and holder. Remove the bobbin cover and bobbin. Remove the screws holding the needle plate. 2. Remove the needle plate by lifting up the right side of the plate. 1 2 b c 56