Singer SE300 Legacy Instruction Manual and Troubleshooting Guide - Page 34
center of the buttonhole and cover the opening. Press
View all Singer SE300 Legacy manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
SEWING 3. Press the Thread Cutter button and raise the presser foot to remove the fabric. )ROGWKHIDEULFDQGVWLWFKDORQJWKHVHDPVRQHDFKVLGH just a needle width from the original stitching line. Remove the basting. c. Wrong side of fabric )ROGWKHIDEULFDORQJWKHEXWWRQKROHHQGDQGVWLWFK triangular ends on the original stitching line. 4. Carefully cut through the center of buttonhole to within 3 mm of each end. Cut diagonally to each corner as shown. Remove the basting. 5. Draw the patch through the opening to the underside. 3UHVVDQGWULPWKHSDWFKWRZLWKLQPP´ RIWKH stitching. a. Right side of fabric c. Wrong side of fabric 6. Turn the fabric and pull the patch through the buttonhole rectangle. Press the patch. c. Wrong side of fabric d. Right side of patch 7. Turn the patch and press the side seam allowance. NOTE: When sewing lighter weight fabric, reinforce buttonhole area. &XWDSDWFKRIIXVLEOHLQWHUIDFLQJFP´ ZLGHUDQGFP ´ ORQJHUWKDQWKHEXWWRQKROH)XVHWRZURQJVLGHRYHUHDFK buttonhole marking. )ROGHDFKVLGHRIWKHSDWFKWRIRUPSOHDWVWKDWPHHWDWWKH center of the buttonhole and cover the opening. Press the patch. 9. Turn the fabric to right side and baste along the center of each fold. a. Right side of fabric 34