Xerox 3200MFPN User Guide - Page 150
Sending a Fax Automatically, Super Fine, Start
UPC - 095205731958
View all Xerox 3200MFPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
8 Faxing The document types recommended for the resolution settings are described in the table below: Mode Standard Fine Super Fine Photo Color Recommended for: Documents with normal sized characters. Documents containing small characters or thin lines or documents printed using a dot-matrix printer. Documents containing extremely fine detail. Super Fine mode is enabled only if the machine with which you are communicating also supports the Super Fine resolution. See the notes below. Documents containing shades of gray or photographs. Documents with colors. Sending a color fax is only possible if the receiving machine supports color fax reception and you send the fax manually. In this mode, memory transmission is not available. NOTE: For memory transmission, Super Fine mode is not available. The resolution setting is automatically changed to Fine. When your machine is set to Super Fine resolution and the receiving fax machine does not support Super Fine resolution, the machine transmits using the highest resolution mode supported by the other fax machine. Sending a Fax Automatically 1. Load the document(s) face up into the ADF, or place a single document face down on the document glass. For details about loading a document, see Loading a Document on page 8-4. 2. Press the Fax button. 3. Adjust the document resolution to suit your fax needs (see Adjusting the Document Resolution on page 8-5). If you need to change the brightness, see Lighten/Darken on page 8-2. 4. Enter the remote fax phone number using the number keypad. You can also press and hold the digit button of the speed dial number if you have assigned one. To store the speed dial number, see Storing a Number for Speed Dialing on page 8-13. 5. Press Start. 6. When a document is placed on the document glass, the display shows "Another Page?" on the top line after the document is scanned into the memory. If you have the next page, remove the scanned page and place 8-6 Xerox Phaser 3200MFP