Xerox 3200MFPN User Guide - Page 209
Paper Specifications on, Replacing the Print
UPC - 095205731958
View all Xerox 3200MFPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
10 Troubleshooting Condition Suggested solutions Back of printouts are dirty Check for leaking toner. Clean the inside of the machine. Cleaning the Inside on page 9-3. Parts of the machine may have toner on them. If defects occur, the problem will likely correct itself after running five (5) blank sheets. Black pages A The print cartridge may not be installed properly. Remove the cartridge and re-insert it. The print cartridge may be defective and need replacing. Remove the print cartridge and install a new one. Replacing the Print Cartridge on page 9-7. The machine may require repair. Contact a service representative. Loose toner Character Voids A Horizontal stripes AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Curl Clean the inside of the machine. Cleaning the Inside on page 9-3. Check the paper type and quality. Paper Specifications on page 11-6. Parts of the machine may have toner on them. If defects occur, the problem will likely correct itself after running five (5) blank sheets. Remove the print cartridge and install a new one. Replacing the Print Cartridge on page 9-7 If the problem persists, the machine may require repair. Contact a service representative. Character voids are white areas within parts of characters that should be solid black: If you are using transparencies, try another type of transparency. Because of the composition of transparencies, some character voids are normal. You may be printing on the wrong surface of the paper. Remove the paper and turn it around. The paper may not meet paper specifications. Paper Specifications on page 11-6. If horizontally aligned black streaks or smears appear: The print cartridge may be installed improperly. Remove the cartridge and re-insert it. The print cartridge may be defective. Remove the print cartridge and install a new one. Replacing the Print Cartridge on page 9-7. If the problem persists, the machine may require repair. Contact a service representative. If the printed paper is curled or paper does not feed into the machine: Turn over the stack of paper in the tray. Also try rotating the paper 180° in the tray. Xerox Phaser 3200MFP 10-21