Xerox 3200MFPN User Guide - Page 199

10 Troubleshooting Display Meaning Suggested Solutions Not Assigned The speed dial location you tried to use has no number assigned to it. The ID you entered is not assigned. Dial the number manually using the number keypad or assign the number. For storing a number, see Automatic Dialing on page 8-13. Enter the correct ID. . No Paper Add Paper The paper in the tray has run out. Load paper in the tray. See Loading Paper on page 2-6. Operation Not Assigned You are doing the Add/ Cancel operation, but there are no jobs waiting. Check the display to see if there are any scheduled jobs. The display should indicate them in Standby mode; for example, Delay Fax. Out of Range The current date and time you entered is not correct. Enter the correct date and time. Open Front Door Remove Paper Paper has jammed in the feeding area of the tray Paper has jammed in the fuser area or around the print cartridge. Clear the jam. See In the Tray on page 10-4. Clear the jam. See In the Fuser Area or Around the Print Cartridge on page 10-5. Open Rear Cover Remove paper Paper has jammed in the paper exit area. Clear the jam. See In the Paper Exit Area. on page 106. Power Failure Power has turned off then on and the machine's memory has not been saved. The job which you were trying to do before the power failure must be completely re-done. Remove Documents from ADF The Favorite Copy button is set to Clone, Autofit, ID Card Copy or Poster and you press the button. The Clone, Autofit, ID Card Copy or Poster feature does not work with ADF. Remove the documents in the ADF. Retry Redial? The machine is waiting for a specified time interval to redial a previously busy station. You can press Enter to immediately redial, or Stop/ Clear to cancel the redial operation. Scanner Locked The scanner module is Unplug the power cord and plug locked. it back in. Xerox Phaser 3200MFP 10-11