Xerox 3200MFPN User Guide - Page 206
Printing Quality Problems, Condition, Suggested solutions - install toner problem
UPC - 095205731958
View all Xerox 3200MFPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
10 Troubleshooting Printing Quality Problems If the inside of the machine is dirty or paper has been loaded improperly, you may notice a reduction in print quality. See the table below to clear the problem. Condition Suggested solutions Light or faded print AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Toner specks AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Dropouts AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc If a vertical white streak or faded area appears on the page: The toner supply is low. You may be able to temporarily extend the print cartridge life. Redistributing Print Cartridge Toner on page 9-6 If this does not improve the print quality, install a new print cartridge. The paper may not meet paper specifications; for example, the paper is too moist or too rough. Paper Specifications on page 11-6. If the entire page is light, the print resolution setting is too low. Adjust the print resolution. For details, see Printing on page 6-1. A combination of faded or smeared defects may indicate that the print cartridge needs cleaning. Cleaning the Drum on page 9-9. The surface of the LSU part inside the machine may be dirty. Clean the LSU (Cleaning the Inside on page 9-3). Contact a service representative. The paper may not meet specifications; for example, the paper is too moist or too rough. Paper Specifications on page 11-6. Parts of the machine may have toner on them. If defects occur, the problem will likely correct itself after running five (5) blank sheets. The transfer roller may be dirty. Clean the inside of your machine. Cleaning the Inside on page 9-3. The paper path may need cleaning. Cleaning the Drum on page 9-9. If faded areas, generally rounded, occur randomly on the page: A single sheet of paper may be defective. Try reprinting the job. The moisture content of the paper is uneven or the paper has moist spots on its surface. Try a different brand of paper. Paper Specifications on page 11-6. The paper lot is bad. The manufacturing processes can cause some areas to reject toner. Try a different kind or brand of paper. The print cartridge may be defective. Vertical repetitive defects on page 10-19. If these steps do not correct the problem, contact a service representative. 10-18 Xerox Phaser 3200MFP