Xerox 3200MFPN User Guide - Page 231
Labels, Transparencies, to print labels.
UPC - 095205731958
View all Xerox 3200MFPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
11 Specifications Labels CAUTION: - To avoid damaging the machine, use only labels recommended for laser printers. - To prevent serious jams, always load one sheet of paper at a time to print labels. - Never print on the same sheet of labels more than once and never print on a partial sheet of labels. When selecting labels, consider the quality of each component: • Adhesives: The adhesive material should be stable at 356°F (180°C), the machine's fusing temperature. • Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets with spaces between the labels, causing serious jams. • Curl: Prior to printing, labels must lie flat with no more than 5 in. (13 mm) of curl in any direction. • Condition: Do not use labels with wrinkles, bubbles or other indications of separation. Transparencies Transparencies used in the machine must be able to withstand 356°F (180°C), the machine's fusing temperature. NOTE: Load only 1 transparency at a time. CAUTION: To avoid damaging the machine, use only transparencies recommended for use in laser printers. Xerox Phaser 3200MFP 11-13