Xerox 3200MFPN User Guide - Page 200

10 Troubleshooting Display Meaning Suggested Solutions Stop Pressed The Stop/Clear button has been pressed during a copy or fax operation. Try again. Toner Empty The print cartridge has run out. Replace the print cartridge with a new one. See Replacing the Print Cartridge on page 9-7. Note: A used cartridge will not reset this message. Toner Low The toner is almost empty. Take out the print cartridge and gently shake it. By doing this, you can temporarily re-establish printing operations. See Redistributing Print Cartridge Toner on page 9-6. Hsync Error There is a serious problem in your machine. Turn the machine off and back on. If the problem persists, please call for service. Scan Stopped The Stop/Clear button has been pressed during a network scanning job. Try again. Aborting.. Scan to email job is aborted by pressing Stop/Clear button. Try again. Send Error (SMTP) SMTP Server CONN. Failure There is a problem in SMTP. Change to the available server. Send Error (DNS) There is a problem in DNS. Configure the DNS setting. Authentication Failure Invalid SMTP acconut Enter the correct acconut or or password entered by password. the user. Invalid SMTP Account Invalid account is entered. Enter the correct acconut. Authentication Required There is a problem in SMTP authentication. Configure the authentication setting. Send Stopped The Stop/Clear button has been pressed during a sending mail. Try again. 10-12 Xerox Phaser 3200MFP