Xerox 6180MFP User Guide - Page 122

Adjusting Copying Options Output Adjustments You can change the following output adjustment settings: ■ Collating Copies on page 6-12 ■ Output Quality on page 6-12 Collating Copies When you make several copies of a multi-page document, you can collate the output. For example, if you are making three single-sided copies of a six-page document, the copies are printed in this order when you select collated: 1, 2, 3, 4, 5, 6, 1, 2, 3, 4, 5, 6, 1, 2, 3, 4, 5, 6 If you select uncollated, the copies are printed in this order: 1, 1, 1, 2, 2, 2, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6 To select a collating option: 1. On the control panel, press the Copy button. 2. Select Collated, and then press the OK button. 3. Select Uncollated or Collated, and then press the OK button. Note: The factory default is Uncollated. Output Quality The following table describes the two output-quality modes: Output-Quality Mode Standard Enhanced Type of Copy Job General-purpose mode for copies. Produces crisp, bright copies at high speed. Best mode for high quality copies. Produces very smooth accurate colors. This mode takes longer to process and print than Standard mode. To change the output-quality mode: 1. On the control panel, press the Copy button. 2. Select Output Quality, and then press the OK button. 3. Select either Standard or Enhanced, and then press the OK button. Note: The factory default is Standard. Phaser® 6180MFP Multifunction Printer 6-12