Xerox 6180MFP User Guide - Page 220
Printer Too Hot, RAM Disk Full
UPC - 095205733839
View all Xerox 6180MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
Message PDL Error Press Set Paper JAM RAM Disk Full Press Set Ready to Copy Printer Too Hot 142-700 Turned Halfmode Ready to Copy Non-Xerox Toner Installed Reboot Printer NNN-NNN Reboot Printer 116-NNN Reboot Printer NNN-NNN Reboot Printer 072-215 Reboot Printer 077-215 Control Panel Error Messages Condition/Reason/Action Error relating to PCL emulation problems has occurred. Press the OK button to clear the message, cancel the current print job, and conduct the next print job, if any. Press the Stop button to cancel the print job. Paper is jammed inside the printer. Follow the instructions display on the control panel to remove the jammed paper. See Paper Jams on page 10-2. RAM disk memory is full and cannot continue processing the current print job. Press the OK button to clear the message, cancel the current print job, and conduct the next print job, if any. Press the Stop button to cancel the print job. Press the Forward Arrow button to open the Walk-Up Features menu and delete the current job. To avoid this error in the future, do the following: Reduce the number of print pages, such as splitting the print data. Increase free memory space by deleting unnecessary data in the RAM disk. The printer's internal temperature is too high. Processing on the printer has been slowed down. When the internal temperature falls, the processing speed will automatically increase. The printer is in the custom toner mode. Though some of the print cartridges reach the end of their lives, you can continue printing. Error NNN-NNN relates to printer problems. Turn the printer off and then on. If the error continues, refer to the Xerox Support website, www.xerox.com/office/6180MFPsupport. Error 116-NNN relates to printer problems. Turn the printer off and then on. The Multi-Protocol Network Card (optional) is not installed correctly or is not working correctly due to damage or malfunction. Reinstall the Multi-Protocol Network Card. The 550-Sheet Feeder (optional) is not installed correctly or is not working correctly due to damage or malfunction. Reinstall the sheet feeder. The Duplex Unit (optional) is not installed correctly or is not working correctly due to damage or malfunction. Reinstall the Duplex Unit. Phaser® 6180MFP Multifunction Printer 10-36