Xerox 6180MFP User Guide - Page 221
NV RAM Error, Scanner Lamp Error
UPC - 095205733839
View all Xerox 6180MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
Control Panel Error Messages Message Reboot Printer 116-316 Reboot Printer 116-320 NV RAM Error Error 116-390 Restart Printer Scanner Lamp Error Error 062-371 Restart Printer Set xxxx XXXXXXXX Set xxxx YYYYYYYY SysError NNN-NNN Press Set Tray Detached Push in xxxx Wrong Paper Size Reload xxxx Set xxxx XXXX Condition/Reason/Action Additional memory (optional) is not installed correctly or is not working correctly due to damage or malfunction. Reinstall the additional memory. An unsupported additional memory (optional) is installed. Replace the specified additional memory. An internal error has occurred. Restart the printer. If the problem persists, contact Xerox Technical Support. The scan bar lock switch is set to the locked position. Set the scan bar lock switch to the unlocked position, and then turn the printer off and then on. Note: When the printer tries to activate the scan bar when it is locked, it produces a loud noise. The tray specified by xxxx is out of paper, or the specified paper could not be detected in the tray. Fill the tray with the indicated size, direction, and type of paper. xxx indicates the number of the tray or Tray 1 (MPT). See Loading Paper in Trays 2 and 3 on page 5-13. A system error has occurred. Press the OK button to clear the message. Tray xxxx is pulled out. Set Tray xxxx into the correct position. xxx indicates the number of the tray. The correct paper is not set in Tray xxxx. Set the following size, direction, and type of paper into the tray: XXXX. xxx indicates the number of the tray or Tray 1 (MPT). See Loading Paper in Trays 2 and 3 on page 5-13. NNN indicates a numeric value. Phaser® 6180MFP Multifunction Printer 10-37