Xerox 6180MFP User Guide - Page 173

Network Settings, PS Error Report, PS Job Time-Out, Paper Select Mode, Select From Tray, Ethernet - phaser d ps

Page 173 highlights

Description of Menu Items PostScript Settings ■ PS Error Report: Specifies whether an error report is printed when a PostScript error occurs. ■ PS Job Time-Out: Specifies the maximum execution time for a PostScript job to complete. If the job exceeds the specified number of minutes, a PostScript error occurs. ■ Paper Select Mode: Specifies how the tray is selected for PostScript print jobs. ■ Auto The tray is selected as set in PCL mode. ■ Select From Tray The tray is selected in a method compatible with regular PostScript printers. Note: Changes to PS Job Time-Out and Paper Select mode settings require that the printer be turned off and on to make them effective. Network Settings Specifies printer settings affecting jobs sent to the printer through a network port. The settings in the Network Settings menu cannot be set when entering this menu during printing. You need to restart the printer to activate the new settings. After making the settings, turn off the printer, and then turn it back on again. ■ Ethernet: Specifies the communication speed and the modes of Ethernet. ■ Auto (default): Automatically detects 10Base Half, 10Base Full, 100Base Half, and 100Base Full. ■ 10Base Half: Uses 10base-T half-duplex. ■ 10Base Full: Uses 10base-T full-duplex. ■ 100Base Half: Uses 100base-TX half-duplex. ■ 100Base Full: Uses 100base-TX full-duplex. ■ TCP/IP: Specifies the TCP/IP settings for the network. ■ Get IP Address: Specifies whether to automatically or manually retrieve the IP address. DHCP/Autonet (default) Automatically sets the IP address. BOOTP Uses BOOTP to set the IP address automatically. RARP Uses RARP to set the IP address automatically. DHCP Uses DHCP to set the IP address automatically. Panel You can set the IP address manually by entering it on the control panel. Phaser® 6180MFP Multifunction Printer 9-10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248

Description of Menu Items
Phaser® 6180MFP Multifunction Printer
9-10
PostScript Settings
PS Error Report
: Specifies whether an error report is printed when a PostScript error
occurs.
PS Job Time-Out
: Specifies the maximum execution time for a PostScript job to
complete. If the job exceeds the specified number of minutes, a PostScript error occurs.
Paper Select Mode
: Specifies how the tray is selected for PostScript print jobs.
Auto
The tray is selected as set in PCL mode.
Select From Tray
The tray is selected in a method compatible with regular PostScript printers.
Note:
Changes to PS Job Time-Out and Paper Select mode settings require that the printer be
turned off and on to make them effective.
Network Settings
Specifies printer settings affecting jobs sent to the printer through a network port.
The settings in the Network Settings menu cannot be set when entering this menu during
printing.
You need to restart the printer to activate the new settings. After making the settings, turn off
the printer, and then turn it back on again.
Ethernet
: Specifies the communication speed and the modes of Ethernet.
Auto
(default): Automatically detects 10Base Half, 10Base Full, 100Base Half, and
100Base Full.
10Base Half
: Uses 10base-T half-duplex.
10Base Full
: Uses 10base-T full-duplex.
100Base Half
: Uses 100base-TX half-duplex.
100Base Full
: Uses 100base-TX full-duplex.
TCP/IP
: Specifies the TCP/IP settings for the network.
Get IP Address
: Specifies whether to automatically or manually retrieve the IP
address.
DHCP/Autonet
(default)
Automatically sets the IP address.
BOOTP
Uses BOOTP to set the IP address automatically.
RARP
Uses RARP to set the IP address automatically.
DHCP
Uses DHCP to set the IP address automatically.
Panel
You can set the IP address manually by entering
it on the control panel.