Canon PIXMA Pro9500 Quick Start Guide - Page 60
Printing Maintenance, Check the Print Head condition with the printed nozzle check pattern.
View all Canon PIXMA Pro9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Printing Maintenance (3) Select the ink group to clean. Clicking Initial Check Items displays the items to be checked before cleaning. (4) Click OK. Print Head Cleaning starts when the POWER lamp starts blinking blue. Do not perform any other operations until the Print Head Cleaning finishes. This takes about 120 seconds. (5) Load a sheet of Letter-sized plain paper in the Auto Sheet Feeder. If other than Letter-sized paper is loaded, you cannot print the nozzle check pattern. Be sure to use Letter-sized plain paper. (6) Confirm the displayed message and click Print Check Pattern to print the nozzle check pattern. The nozzle check pattern is printed. Do not perform any other operations until the nozzle check pattern printing finishes. The nozzle check pattern will not be printed correctly if there is not enough ink. Replace the ink tank if the remaining amount of ink is insufficient. See "Replacing an Ink Tank" on page 35. 5 Check the Print Head condition with the printed nozzle check pattern. See "Examining the Nozzle Check Pattern" on page 51. If the problem remains after performing Print Head Cleaning twice, try Print Head Deep Cleaning. See "Print Head Deep Cleaning" on page 57. 56