Canon PowerShot G7 X User Guide - Page 174
Hybrid Auto Mode
View all Canon PowerShot G7 X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Shooting Cannot shoot. ●● In Playback mode (=103), press the shutter button halfway (=27). Strange display on the screen under low light (=29). Strange display on the screen when shooting. ●● Note that the following display problems are not recorded in still images but are recorded in movies. -- The screen may flicker and horizontal banding may appear under fluorescent or LED lighting. Full-screen display is not available while shooting (=49). No date stamp is added to images. ●● Although date stamps cannot be added to images with this camera, images can be printed with the date as follows. -- Use the software to print For details, see "Software Instruction Manual" (= 163). -- Print using printer functions [ ] flashes on the screen when the shutter button is pressed, and shooting is not possible (=37). [ ] is displayed when the shutter button is pressed halfway (=37). ●● Set [IS Mode] to [Continuous] (=91). ●● Raise the flash and set the flash mode to [ ] (=88). ●● Increase the ISO speed (=75). ●● Mount the camera on a tripod or take other measures to keep it still. In this case, you should set [IS Mode] to [Off] (=91). Shots are out of focus. ●● Press the shutter button halfway to focus on subjects before pressing it all the way down to shoot (=27). ●● Make sure subjects are within focusing range (=196). ●● Set [AF-assist Beam] to [On] (=52). ●● Confirm that unneeded functions such as macro are deactivated. ●● Try shooting with focus lock or AF lock (=83, =87). Shots are blurry. ●● Blurring may occur more often when Touch Shutter is used to shoot, depending on shooting conditions. Hold the camera still when shooting. No AF frames are displayed and the camera does not focus when the shutter button is pressed halfway. ●● To have AF frames displayed and the camera focus correctly, try composing the shot with higher-contrast subject areas centered before you press the shutter button halfway. Otherwise, try pressing the shutter button halfway repeatedly. Subjects in shots look too dark. ●● Raise the flash and set the flash mode to [ ] (=88). ●● Adjust brightness by using exposure compensation (=74). ●● Adjust contrast by using i-Contrast (=77, =123). ●● Use AE lock or spot metering (=74, =74). Subjects look too bright, highlights are washed-out. ●● Lower the flash and set the flash mode to [ ] (=34). ●● Adjust brightness by using exposure compensation (=74). ●● Use AE lock or spot metering (=74, =74). ●● Reduce the lighting on subjects. Shots look too dark despite the flash firing (=37). ●● Shoot within flash range (=196). ●● Adjust brightness by using flash exposure compensation or changing the flash output level (=89, =95). ●● Increase the ISO speed (=75). Subjects in flash shots look too bright, highlights are washed-out. ●● Shoot within flash range (=196). ●● Lower the flash and set the flash mode to [ ] (=34). ●● Adjust brightness by using flash exposure compensation or changing the flash output level (=89, =95). White spots appear in flash shots. ●● This is caused by light from the flash reflecting off dust or airborne particles. Shots look grainy. ●● Lower the ISO speed (=75). ●● High ISO speeds in some shooting modes may cause grainy images (=55). Subjects are affected by red-eye. ●● Set [Red-Eye Lamp] to [On] (=52). The red-eye reduction lamp (=4) will be activated in flash shots. For best results, have subjects look at the red-eye reduction lamp. Also try increasing the lighting in indoor scenes and shooting at closer range. ●● Edit images using red-eye correction (=123). Before Use Basic Guide Advanced Guide 1 Camera Basics 2 Auto Mode / Hybrid Auto Mode 3 Other Shooting Modes 4 P Mode 5 Tv, Av, M, and C Mode 6 Playback Mode 7 Wi-Fi Functions 8 Setting Menu 9 Accessories 10 Appendix Index 174