Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 139
SCSI/IDE CD-ROM Drive Test Error Codes, Table 3-13
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
3-42 Compaq ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maintenance and Service Guide 6600 - 6699, SCSI/IDE CD-ROM Drive Test Error Codes The 6600 series of diagnostic error codes identifies failures with the CD-ROM drive cabling, CD-ROM drives, adapter boards, or the system board assembly. Table 3-13 SCSI/IDE CD-ROM Drive Test Error Codes Error Code 6600-xx 6605-xx 6608-xx Description CD-ROM ID failed. CD-ROM read failed. SCSI controller test failed. Recommended Action The following steps apply to error codes 6600-xx through 6608-xx. 1. Replace the CD-ROM media and retest. 2. Check and/or replace the signal cable and retest. 3. Check the switch settings on the adapter board (if applicable). 4. Replace the SCSI controller (if applicable) and retest. 5. Replace the CD-ROM drive and retest. 6. Replace the system board and retest. 6700 - 6799, SCSI Tape Drive Test Error Codes The 6700 series of diagnostic error codes identifies failures with tape cartridges, tape drives, media changers, tape drive cabling, adapter boards, or the system board assembly. Table 3-14 SCSI Tape Drive Test Error Codes Error Code 6700-xx 6706-xx 6708-xx 6709-xx 6728-xx Description SCSI tape ID drive types test failed. SCSI disk SA/media test failed. SCSI controller test failure. SCSI disk erase tape test failed. Media load/unload test failed. Recommended Action The following steps apply to error codes 6700-xx through 6728-xx. 1. Run the System Configuration Utility and verify the drive type. 2. Replace the SCSI tape drive signal and power cables and retest. 3. Replace the SCSI controller and retest. 4. Replace the SCSI tape drive and retest. 5. Replace the system board and retest.