Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 27
Front Air Baffle, Pull the front air baffle out of the front fan assembly area
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2-10 Compaq ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maintenance and Service Guide Front Air Baffle To remove the front air baffle: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the right side access panel. See "Right Side Access Panel" earlier in this chapter. 3. Press in on the locking tabs at each end of the front air baffle . 4. Pull the front air baffle out of the front fan assembly area . 1 2 1 Figure 2-5. Removing the front air baffle Reverse steps 1 through 4 to replace the front air baffle.
2-10
Compaq ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maintenance and Service Guide
Front Air Baffle
To remove the front air baffle:
1.
Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2.
Remove the right side access panel. See “Right Side Access Panel” earlier in this chapter.
3.
Press in on the locking tabs at each end of the front air baffle
.
4.
Pull the front air baffle out of the front fan assembly area
.
1
1
2
Figure 2-5.
Removing the front air baffle
Reverse steps 1 through 4 to replace the front air baffle.