Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 45
Using the handle, slide the power supply out the rear of the server while carefully
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
2-28 Compaq ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maintenance and Service Guide 4. Press the center release lever of the power supply handle , then pull the handle downward to detach the power supply from the power backplane board . 5. Using the handle, slide the power supply out the rear of the server while carefully supporting the weight of the power supply . 3 2 1 Figure 2-23. Removing a hot-plug power supply Reverse steps 1 through 5 to replace a hot-plug power supply. CAUTION: To reduce the risk of data loss or damage to the equipment, any power supply bay that is not populated with a power supply must be covered with a blanking panel. This ensures adequate airflow inside the server.
2-28
Compaq ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maintenance and Service Guide
4.
Press the center release lever of the power supply handle
, then pull the handle
downward to detach the power supply from the power backplane board
.
5.
Using the handle, slide the power supply out the rear of the server while carefully
supporting the weight of the power supply
.
2
1
3
Figure 2-23.
Removing a hot-plug power supply
Reverse steps 1 through 5 to replace a hot-plug power supply.
CAUTION:
To reduce the risk of data loss or damage to the equipment, any power supply bay
that is not populated with a power supply must be covered with a blanking panel. This ensures
adequate airflow inside the server.