Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 197
PCI Hot Plug LED Status Indicators, Table 4-9
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
4-12 Compaq ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maintenance and Service Guide PCI Hot Plug LED Status Indicators Each set of PCI Hot Plug LED indicators has a PCI Hot Plug button that activates or deactivates its associated PCI Hot Plug slot. The LEDs are viewed from the rear of the unit or through the PCI Hot Plug access doors on the top access panel. A PCI Hot Plug slot can also be activated or deactivated through the operating system's hot-plug software application. The PCI Hot Plug amber LED and green LED indicate the status of each inserted PCI device. 11 10 9 8 7 6 5 4 32 1 1 23 Figure 4-10. PCI Hot Plug LED indicators Table 4-9 indicates the slot condition and status for each state of the two LEDs shown in Figure 4-10. Amber LED (Status) Off On * Not shown Green LED (Power) On Flashing Off Table 4-9 PCI Hot Plug LED Status Indicators Slot Status Slot does not require attention. Slot requires attention. There may be a problem with the slot, PCI board, or driver. Check the green LED before opening the slot. Current is supplied to the slot. The power to the slot is in the process of being turned on or off. This process may take several minutes. Do not open the slot release lever until the green LED is completely off. Slot power current is off. OK to Open Slot Release Lever* N/A N/A No No Yes