Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 34
Removable Media Devices
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Removal and Replacement Procedures 2-17 Removable Media Devices To remove a removable media device from the removable media area: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the right side access panel. See "Right Side Access Panel" earlier in this chapter. 3. Disconnect the power and signal cables from the removable media device. 4. Remove the removable media trim. See "Removable Media Trim" earlier in this chapter. 5. Remove the two retaining screws securing the removable media device to the chassis . 6. Pull the removable media device from the removable media bay . 1 2 1 Figure 2-12. Removing a removable media device Reverse steps 1 through 6 to replace a removable media device in the removable media area.