Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 158
Message, Description, Recommended Action, WARNING, contains a valid
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Diagnostics and Troubleshooting 3-61 Table 3-16 ADU Diagnostic Messages continued Message Description Swapped cables or Configuration error detected. More logical drives were created than are supported on this controller, causing lost logical drive volumes. The maximum logical volume count X was exceeded during logical volume addition. All logical volumes beyond X have been lost and cannot be recovered. SOLUTION: Identify the drives that contain the lost logical volumes. Move those drives to another controller where the logical volumes can be recreated. NOTE! If a drive contains a valid logical volume and a lost logical volume, then do not move that drive to another controller. Recommended Action Identify the drives containing lost volumes, and move them to another controller so the lost volumes can be recreated. WARNING: Do not move a drive if it also contains valid volume data. This process will cause all valid data to be destroyed! continued