Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 30
Face Plates, Removable Media Trim
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Removal and Replacement Procedures 2-13 Face Plates NOTE: The front bezel and the removable media trim can be removed independently of each other. Removable Media Trim To remove the removable media trim: 1. Remove the four T-15 screws securing the removable media trim to the front of the chassis. 2. Pull the frame away from the chassis. Figure 2-8. Removing the removable media trim Reverse steps 1 and 2 to replace the removable media trim.
Removal and Replacement Procedures
2-13
Face Plates
NOTE:
The front bezel and the removable media trim can be removed independently of each other.
Removable Media Trim
To remove the removable media trim:
1.
Remove the four T-15 screws securing the removable media trim to the front of the
chassis.
2.
Pull the frame away from the chassis.
Figure 2-8.
Removing the removable media trim
Reverse steps 1 and 2 to replace the removable media trim.