Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 60
this Remove the processor support brace by loosening the two thumbscrews
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Removal and Replacement Procedures 2-43 To remove a cache accelerator: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the right side access panel. See "Right Side Access Panel" earlier in this chapter. 3. Remove the main processor air baffle. See "Main Processor Air Baffle" earlier in this chapter. 4. Remove the processor support brace by loosening the two thumbscrews . Then pull the brace away from the server . 2 1 Figure 2-37. Removing the processor support brace
Removal and Replacement Procedures
2-43
To remove a cache accelerator:
1.
Perform the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2.
Remove the right side access panel. See
“
Right Side Access Panel
”
earlier in this chapter.
3.
Remove the main processor air baffle. See
“
Main Processor Air Baffle
”
earlier in
this chapter.
4.
Remove the processor support brace by loosening the two thumbscrews
. Then pull the
brace away from the server
.
1
2
Figure 2-37.
Removing the processor support brace