Dell Brocade 825 Brocade Adapters Troubleshooting Guide - Page 125
Displaying FC port properties (HBA)
View all Dell Brocade 825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Collecting port data 3 • Fabric WWN • Fibre Channel map ID • FCoE forwarder writing or nonwriting mode • Maximum speed supported • Port operating topology • Authentication status, algorithm, group, and error status Displaying FCoE port properties To display the HCM FCoE Port Properties panel, use these steps. 1. Select an FCoE port in the device tree. 2. Click the Properties tab in the right pane. Displaying FC port properties (HBA) Use HCM vHBA Properties to display FC port properties for HBAs or Fabric Adapter ports configured in HBA mode. Properties include the following: • Port WWN • Node WWN • Path TOV (not displayed for Solaris systems) • Port log • I/O profile To display the HCM vHBA Port Properties panel, use these steps. 1. Select an FC port in the device tree. 2. Click the vHBA tab in the right pane. Displaying remote port properties Use the HCM Remote Port Properties panel to display properties that are associated with the remote port, such as WWN, node WWN, port name, Fibre Channel address, frame data field size, online or offline state, role (such as target or initiator), remote device information, QoS priority, QoS flow, and target ID. Display this properties panel using the following steps. 1. From the device tree, select a remote port. 2. Click the Remote Port Properties tab in the right panel. If it is a target port, two tabs display in the right pane: Properties and LUNs. Brocade Adapters Troubleshooting Guide 101 53-1002145-01