Dell Force10 S4820T S4820T Configuration Guide - Page 1076

www.dell.com | support.dell.com This message in Message 4 indicates that the specified card is not receiving enough power. In response, the system first shuts down Power over Ethernet (PoE). If the under-voltage condition persists, line cards are shut down, then RPMs. Troubleshoot an under-voltage condition To troubleshoot an under-voltage condition, check that the correct number of power supplies are installed and their Status LEDs are lit. The SNMP traps and OIDs in Table 55-4 provide information on S-Series environmental monitoring hardware and hardware components. Table 55-4. SNMP Traps and OIDs OID String OID Name Description Receiving power .1.3.6.1.4.1.6027.3.10.1.2.5.1.6 chSysPortXfpRecvPower Transmitting power .1.3.6.1.4.1.6027.3.10.1.2.5.1.8 chSysPortXfpTxPower Temperature .1.3.6.1.4.1.6027.3.10.1.2.5.1.7 chSysPortXfpRecvTemp Hardware MIB Buffer Statistics .1.3.6.1.4.1.6027.3.16.1.1.4 fpPacketBufferTable .1.3.6.1.4.1.6027.3.16.1.1.5 fpStatsPerPortTable .1.3.6.1.4.1.6027.3.16.1.1.6 fpStatsPerCOSTable OID to display the receiving power of the connected optics. OID to display the transmitting power of the connected optics. OID to display the Temperature of the connected optics. Note: These OIDs will only be generated if the CLI command enable optic-info-update-interval is enabled. View the modular packet buffers details per stack unit and the mode of allocation. View the forwarding plane statistics containing the packet buffer usage per port per stack unit. View the forwarding plane statistics containing the packet buffer statistics per COS per port. Buffer tuning Buffer Tuning allows you to modify the way your switch allocates buffers from its available memory, and helps prevent packet drops during a temporary burst of traffic. The S-Series ASICs implement the key functions of queuing, feature lookups, and forwarding lookups in hardware. 1076 | S-Series Debugging and Diagnostics