Dell Force10 S4820T S4820T Configuration Guide - Page 803

Figure 40-2. rmon event Command Example FTOS(conf)#rmon event 1 log trap eventtrap description "High ifOutErrors" owner nms1 The above configuration example creates RMON event number 1, with the description "High ifOutErrors", and generates a log entry when the event is triggered by an alarm. The user nms1 owns the row that is created in the event table by this command. This configuration also generates an SNMP trap when the event is triggered using the SNMP community string "eventtrap". Configure RMON collection statistics To enable RMON MIB statistics collection on an interface, use the RMON collection statistics command in interface configuration mode. To remove a specified RMON statistics collection, use the no form of this command. Command Syntax [no] rmon collection statistics {controlEntry integer} [owner ownername] Command Mode Purpose CONFIGURATION INTERFACE (config-if) controlEntry: Specifies the RMON group of statistics using a value. integer: A value from 1 to 65,535 that identifies the RMON Statistics Table. The value must be unique in the RMON Statistic Table. owner: (Optional) Specifies the name of the owner of the RMON group of statistics. ownername: (Optional) Records the name of the owner of the RMON group of statistics. Default is a null-terminated string The following command enables the RMON statistics collection on the interface, with an ID value of 20 and an owner of "john." Figure 40-3. rmon collection statistics Command Example FTOS(conf-if-mgmt)#rmon collection statistics controlEntry 20 owner john Remote Monitoring (RMON) | 803