Dell Force10 S4820T S4820T Configuration Guide - Page 592

www.dell.com | support.dell.com Station Move Violation Actions Station Move Violation Actions are supported only on platforms: e S4820T . no-station-move is the default behavior. You can configure the system to take an action if a station move occurs using one the following options with the mac learning-limit command:. Task Command Syntax Generate a system log message indicating a station move. Shut down the first port to learn the MAC address. Shut down the second port to learn the MAC address. Shut down both the first and second port to learn the MAC address. station-move-violation log station-move-violation shutdown-original station-move-violation shutdown-offending station-move-violation shutdown-both Command Mode INTERFACE INTERFACE INTERFACE INTERFACE To display a list of interfaces configured with MAC learning limit or station move violation actions: Task Display a list of all of the interfaces configured with MAC learning limit or station move violation. Command Syntax show mac learning-limit violate-action Command Mode CONFIGURATION Recovering from Learning Limit and Station Move Violations After a learning-limit or station-move violation shuts down an interface, you must manually reset it: Task Command Syntax Reset interfaces in ERR_Disabled state caused by a learning limit violation or station move violation. Reset interfaces in ERR_Disabled state caused by a learning limit violation. Reset interfaces in ERR_Disabled state caused by a station move violation. mac learning-limit reset mac learning-limit reset learn-limit-violation [interface | all] mac learning-limit reset station-move-violation [interface | all] Command Mode EXEC Privilege EXEC Privilege EXEC Privilege Note: Alternatively, you can reset the interface by shutting it down using the shutdown command and then reenabling it using the command no shutdown. 592 | Layer 2