Dell Force10 S4820T S4820T Configuration Guide - Page 56

www.dell.com | support.dell.com --More-- An example of accessing the running configuration file on an external flash drive inserted into the S4820T's USB port: FTOS#show file-systems Size(b) 2056916992 4040642560 - Free(b) 1774563328 151228416 - Feature Type FAT32 USERFLASH FAT32 USBFLASH - network - network - network Flags rw rw rw rw rw Prefixes flash: usbflash: ftp: tftp: scp: File System Management The Dell Force10 system can use the internal Flash, external Flash, or remote devices to store files. It stores files on the internal Flash by default but can be configured to store files elsewhere. To view file system information: Task View information about each file system. Command Syntax show file-systems Command Mode EXEC Privilege The output of the command show file-systems in the example below shows the total capacity, amount of free memory, file structure, media type, read/write privileges for each storage device in use. FTOS#show file-systems Size(b) Free(b) Feature Type Flags 520962048 213778432 dosFs2.0 USERFLASH 127772672 21936128 dosFs2.0 USERFLASH - - - network - - - network - - - network Prefixes rw flash: rw slot0: rw ftp: rw tftp: rw scp: You can change the default file system so that file management commands apply to a particular device or memory. To change the default storage location: Task Change the default directory. Command Syntax cd directory Command Mode EXEC Privilege In the example below, the default storage location is changed to the external Flash of the primary RPM. File management commands then apply to the external Flash rather than the internal Flash. 56 | Getting Started