Dell Force10 S4820T S4820T Configuration Guide - Page 715

Command Syntax show ip ospf database Command Mode Usage EXEC Privilege View the summary information for the OSPF database Use the following command in EXEC Privilege mode to view the OSPFv2 configuration for a neighboring router: Command Syntax show ip ospf neighbor Command Mode Usage EXEC Privilege View the configuration of OSPF neighbors connected to the local router. Use the following command in EXEC Privilege mode to view the OSPFv2 configuration for LSA throttling: Command Syntax show ip ospf timers rate-limit Command Mode Usage EXEC Privilege View the LSAs currently in the queue. Use the following command in EXEC Privilege mode to configure the debugging options of an OSPFv2 process: Command Syntax Command Mode Usage debug ip ospf process-id [event | packet | spf | database-timers rate-limit] EXEC Privilege View debug messages. To view debug messages for a specific OSPF process ID, enter debug ip ospf process-id. If you do not enter a process ID, the command applies to the first OSPF process. To view debug messages for a specific operation, enter one of the optional keywords: • event: view OSPF event messages • packet: view OSPF packet information. • spf: view shortest path first (spf) information. • database-timers rate-limit: view the LSAs currently in the queue Sample Configurations for OSPFv2 The following configurations are examples for enabling OSPFv2. These are not comprehensive directions. They are intended to give you a some guidance with typical configurations. You can copy and paste from these examples to your CLI. Be sure you make the necessary changes to support your own IP Addresses, Interfaces, Names, etc. Open Shortest Path First (OSPFv2) | 715