Dell Force10 S4820T S4820T Configuration Guide - Page 461

FTOS(config-ifrange-gi-5/1-23-te-1/1-2)# interface range Vlan 2 - 100 , Port 1 - 25 FTOS(config-if-range-gi-5/1-23-te-1/1-2-so-5/1-vl-2-100-po-1-25)# no shutdown FTOS(config-if-range)# Interface Range Macros The user can define an interface-range macro to automatically select a range of interfaces for configuration. Before you can use the macro keyword in the interface-range macro command string, you must define the macro. To define an interface-range macro, enter this command: Command Syntax FTOS(config)# define interface-range macro_name {vlan vlan_ID - vlan_ID} | {{gigabitethernet | tengigabitethernet | fortyGigE} slot/interface - interface} [ , {vlan vlan_ID vlan_ID} {{gigabitethernet | tengigabitethernet | fortyGigE} slot/interface - interface}] Command Mode Purpose CONFIGURATION Defines the interface-range macro and saves it in the running configuration file. Define the Interface Range This example shows how to define an interface-range macro named "test" to select Fast Ethernet interfaces 5/1 through 5/4: FTOS(config)# define interface-range test gigabitethernet 5/1 - 4 Choose an Interface-range Macro To use an interface-range macro in the interface range command, enter this command: Command Syntax interface range macro name Command Mode Purpose CONFIGURATION Selects the interfaces range to be configured using the values saved in a named interface-range macro. The example below shows how to change to the interface-range configuration mode using the interface-range macro named "test." FTOS(config)# interface range macro test FTOS(config-if)# Interfaces | 461