Dell Force10 S4820T S4820T Configuration Guide - Page 47

Table 3-1. Pin Assignments Between the Console and a DTE Terminal Server (continued) S-Series Console Port RJ-45 to RJ-45 Rollover Cable Signal RJ-45 pinout RJ-45 Pinout NC 7 2 CTS 8 1 RJ-45 to DB-9 Adapter DB-9 Pin 4 7 Terminal Server Device Signal DTR RTS Default Configuration A version of FTOS is pre-loaded onto the chassis, however the system is not configured when you power up for the first time (except for the default hostname, which is FTOS). You must configure the system using the CLI. Configure a Host Name The host name appears in the prompt. The default host name is FTOS. • Host names must start with a letter and end with a letter or digit. • Characters within the string can be letters, digits, and hyphens. To configure a host name: Step Task 1 Create a new host name. Command Syntax hostname name The example below illustrates the hostname command. FTOS(conf)#hostname R1 R1(conf)# Command Mode CONFIGURATION Access the System Remotely You can configure the system to access it remotely by Telnet. The method for configuring the C-Series and E-Series for Telnet access is different from S-Series. • The C-Series, E-Series, S4810 and the S4820T have a dedicated management port and a management routing table that is separate from the IP routing table. Getting Started | 47