Dell Force10 S4820T S4820T Configuration Guide - Page 394

www.dell.com | support.dell.com Set FRRP Timers Step Command Syntax 1 timer {hello-interval|dead-interval} milliseconds Command Mode Purpose CONFIG-FRRP Enter the desired intervals for Hello-Interval or Dead-Interval times. Hello-Interval: 50-2000, in increments of 50 (default is 500) Dead-Interval: 50-6000, in increments of 50 (default is 1500) The Dead-Interval time should be set at 3x the Hello-Interval. Clear FRRP counters Use one of the following commands to clear the FRRP counters. Command Syntax clear frrp ring-id clear frrp Command Mode Purpose EXEC PRIVELEGED Clear the counters associated with this Ring ID Ring ID: 1-255 EXEC PRIVELEGED Clear the counters associated with all FRRP groups Show FRRP configuration Use the following command to view the configuration for the FRRP group. Command Syntax show configuration Command Mode CONFIG-FRRP Purpose Show the configuration for this FRRP group Show FRRP information Use one of the following commands show general FRRP information. Command Syntax show frrp ring-id show frrp summary Command Mode EXEC or EXEC PRIVELEGED EXEC or EXEC PRIVELEGED Purpose Show the information for the identified FRRP group. Ring ID: 1-255 Show the state of all FRRP groups. Ring ID: 1-255 394 | Force10 Resilient Ring Protocol (FRRP)