Dell MX9116n EMC SmartFabric OS10 User Guide - Page 1086

Usage Information This command changes the LOCAL_PREF attribute for routes meeting the route map criteria. To change the LOCAL_PREF for all routes, use the bgp default local-preference command. The no version of this command removes the LOCAL_PREF attribute. Example OS10(conf-route-map)# set local-preference 200 Supported Releases 10.2.0E or later set metric Set a metric value for a routing protocol. Syntax Parameters set metric [+ | -] metric-value • + - (Optional) Add a metric value to the redistributed routes. • - - (Optional) Subtract a metric value from the redistributed routes. • metric-value - Enter a new metric value, from 0 to 4294967295. Default Not configured Command Mode ROUTE-MAP Usage Information To establish an absolute metric, do not enter a plus or minus sign before the metric value. To establish a relative metric, enter a plus or minus sign immediately preceding the metric value. The value is added to or subtracted from the metric of any routes matching the route map. You cannot use both an absolute metric and a relative metric within the same route map sequence. Setting either metric overrides any previously configured value. The no version of this command removes the filter. Example (Absolute) OS10(conf-route-map)# set metric 10 Example (Relative) OS10(conf-route-map)# set metric -25 Supported Releases 10.2.0E or later set metric-type Set the metric type for the a redistributed routel. Syntax Parameters set metric-type {type-1 | type-2 | external} • type-1 - Adds a route to an existing community. • type-2 - Sends a route in the local AS. • external - Disables advertisement to peers. Default Not configured Command Mode ROUTE-MAP Usage Information • BGP Affects BGP behavior only in outbound route maps and has no effect on other types of route maps. If the route map contains both a set metric-type and a set metric clause, the set metric clause takes precedence. If you enter the internal metric type in a BGP outbound route map, BGP sets the MED of the advertised routes to the IGP cost of the next hop of the advertised route. If the cost of the next hop changes, BGP is not forced to readvertise the route. • external - Reverts to the normal BGP rules for propagating the MED, the default. • internal - Sets the MED of a received route that is being propagated to an external peer equal to the IGP costs of the indirect next hop. 1086 Access Control Lists