Dell MX9116n EMC SmartFabric OS10 User Guide - Page 849

show evpn evi Displays the configuration settings of EVPN instances. Syntax show evpn evi [id] Parameters id - (Optional) Enter the EVPN instance ID, from 1 to 65535. Default Not configured Command mode EXEC Usage information Use this command to verify EVPN instance status, associated VXLAN virtual networks and the RD and RT values the BGP EVPN routes use in the EVI. The status of integrated routing and bridging (IRB) and the VRF used for EVPN traffic also display. Example OS10# show evpn evi 101 EVI : 101, State : up Bridge-Domain : Virtual-Network 101, VNI 101 Route-Distinguisher : 1:95.0.0.4:101(auto) Route-Targets : 0:101:268435556(auto) both Inclusive Multicast : 95.0.0.3 IRB : Enabled(VRF: default) Supported releases 10.4.2.0 or later show evpn mac Displays BGP EVPN routes for host MAC addresses. Syntax Parameters show evpn mac {count | mac-address nn.nn.nn.nn | evi id [mac-address nn.nn.nn.nn | count | next-hop ip-address count]} • count - Displays the total number of local and remote host MAC addresses in EVPN instances. • mac-address nn.nn.nn.nn - Displays the BGP EVPN routes for a specific 48-bit host MAC address. • evi id - Displays the host MAC addresses and next hops in a specified EVPN instance, from 1 to 65535. To filter the output, display information on the host MAC address count for an EVPN ID or for a next-hop IP address, and BGP routes for a specified MAC address. Default Not configured Command mode EXEC Usage information Use this command to display the BGP routes for host MAC addresses in EVPN instances. Examples OS10# show evpn mac Type -(lcl): Local (rmt): remote EVI Mac-Address Type Seq-No Interface/Next-Hop 50 00:00:00:aa:aa:aa rmt 0 55.1.1.3 OS10# show evpn mac count Total MAC Entries : Local MAC Address Count : 2 Remote MAC Address Count : 5 OS10# show evpn mac evi 811 count EVI 811 MAC Entries : Local MAC Address Count : 1 Remote MAC Address Count : 2 OS10# show evpn mac evi 811 next-hop 80.80.1.8 count VXLAN 849