Dell MX9116n EMC SmartFabric OS10 User Guide - Page 1135

match vlan Configures a match criteria based on the VLAN ID number. Syntax match vlan vlan-id Parameters vlan-id - Enter a VLAN ID number, from 1 to 4093. Default Not configured Command Mode CLASS-MAP Usage Information You cannot enter two match statements with the same filter-type. If you enter two match statements with the same filter-type, the second statement overwrites the first statement. Example OS10(conf-cmap-qos)# match vlan 100 Supported Releases 10.2.0E or later mtu Calculates the buffer size allocation for matched flows. Syntax mtu size Parameters size - Enter the size of the buffer (1500 to 9216). Default 9216 Command Mode POLICY-MAP-CLASS-MAP Usage Information The no version of this command returns the value to the default. Example OS10(conf-pmap-nqos-c)# mtu 2500 Supported Releases 10.3.0E or later pause Enables a pause based on buffer limits for the port to start or stop communication to the peer. Syntax Parameters pause [buffer-size size pause-threshold xoff-size resume-threshold xon-size] • buffer-size size - (Optional) Enter the ingress buffer size used as a guaranteed buffer in KB, default values: 10G-45KB, 40G-93KB. • pause-threshold xoff-size - (Optional) Enter the buffer limit for the port to start or initiate a pause to the peer in KB, default values: 10G-9KB, 40G-18KB. • resume-threshold xon-size - (Optional) Enter the buffer limit for the port to stop or cancel sending a pause to the peer in KB (defaults 10G-9KB, 40G-9KB). Default See parameter values Command Mode POLICY-MAP-CLASS-MAP Usage Information Only use this command under the network-qos policy type. Buffer-size, pause-thresholds, and resumethresholds vary based on platform. Add the policy-map with pause to system-qos to service an input to enable pause on all ports, based on a per-port link-level Flow-Control or Priority Flow-Control enable mode. The xoff and xon threshold settings for link-level flow-control are applied on ports where all traffic classes must be mapped to a single PG. Platform-specific default values are based on MTU sizes of 9216 and cable length of 100 meters. The no version of this command returns the value to the default. Quality of service 1135