Dell MX9116n EMC SmartFabric OS10 User Guide - Page 250

Ethernet 1/1/32 Management 1/1/1 Vlan 1 Vlan 10 Vlan 20 Vlan 30 unassigned NO unset up 10.16.153.226/24 YES manual up unassigned NO unset up unassigned NO unset up unassigned NO unset up unassigned NO unset up down up down down down down View VLAN configuration OS10# show vlan Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs, @ - Attached to Virtual Network Q: A - Access (Untagged), T - Tagged NUM Status Description Q Ports 1 Inactive A Eth1/1/1,1/1/6-1/1/32 10 Inactive 20 Inactive 22 Inactive 23 Active A Eth1/1/2 24 Inactive 25 Inactive 26 Inactive 27 Inactive 28 Inactive 29 Inactive 30 Inactive Digital optical monitoring The digital optical monitoring (DOM) feature monitors the digital optical media for temperature, voltage, bias, transmission power (Tx), and reception power (Rx). This feature also generates event logs, alarms, and traps for any fluctuations, when configured thresholds are reached. There are four threshold levels for each of the DOM categories-temperature, voltage, bias, transmission power, and reception power as summarized in the following table: • High • High warning • Low • Low warning The OS10 DOM subsystem periodically monitors the optical transceivers for temperature, voltage, bias, transmission power and reception power changes and generate event logs, alarms, and traps when their respective values cross the predefined thresholds. Table 26. DOM Alarms Alarm Category Alarm Name Traps Generated? Temperature Temperature high Y Temperature high N warning Temperature low Y Temperature low N warning Voltage Voltage high Y Voltage high warning N Voltage low Y Voltage low warning N Bias Bias high Y Bias high warning N Bias low Y Severity Level Major Minor Major Minor Major Minor Major Minor Major Minor Major 250 Interfaces