Dell MX9116n EMC SmartFabric OS10 User Guide - Page 959

Usage Information Use this command to disable and lock the linuxadmin user. The no version of the command enables and unlocks the linuxadmin user. Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.3.0. Also supported in SmartFabric mode starting in release 10.5.0.1. Example OS10(config)# system-user linuxadmin disable OS10(config)# no system-user linuxadmin disable Supported Releases 10.4.3.0 or later system-user linuxadmin password Configures a password for the linuxadmin user. Syntax system-user linuxadmin password {clear-text-password | hashed-password} Parameters None Defaults Not configured Command Mode CONFIGURATION Usage Information Use this command to set a clear-text or hashed-password for the linuxadmin user. Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.3.0. Also supported in SmartFabric mode starting in release 10.5.0.1. Example OS10(config)# system-user linuxadmin password Dell@Force10!@ OS10(config)# system-user linuxadmin password $6$3M55wOYy $Sw1V9Ok3GE4Hmf6h1ARH.dBHy9gpEFYUvdu15ZpnCYzt.nJjFm0VIz/ rQvvJeX6krRtfYs2ZqBl6TkmLGAwtM Supported Releases 10.4.3.0 or later tacacs-server host Configures a TACACS+ server and the key used to authenticate the switch on the server. Syntax Parameters tacacs-server host {hostname | ip-address} key {0 authentication-key | 9 authentication-key | authentication-key} [auth-port port-number] • hostname - Enter the host name of the TACACS+ server. • ip-address - Enter the IPv4 (A.B.C.D) or IPv6 (x:x:x:x::x) address of the TACACS+ server. • key 0 authentication-key - Enter an authentication key in plain text. A maximum of 42 characters. • key 9 authentication-key - Enter an authentication key in encrypted format with a maximum of 128 characters. • authentication-key - Enter an authentication in plain text with a maximum of 42 characters. It is not necessary to enter 0 before the key. • key authentication-key - Enter a text string for the encryption key used to authenticate the switch on the TACACS+ server. A maximum of 42 characters. Default Not configured Command Mode CONFIGURATION Usage Information The authentication key must match the key configured on the TACACS+ server. You cannot enter spaces in the key. The show running-configuration output displays both unencrypted and encrypted keys in encrypted format. Configure the global timeout allowed for authentication requests on TACACS+ servers using the Security 959