Dell MX9116n EMC SmartFabric OS10 User Guide - Page 558

Supported Releases 10.2.0E or later listen Enables peer listening and sets the prefix range for dynamic peers. Syntax Parameters listen ip-address [limit count] • ip-address-Enter the BGP neighbor IP address. • limit count-(Optional) Enter a maximum dynamic peer count, from 1 to 4294967295. Default Not configured Command Mode ROUTER-TEMPLATE Usage Information Enables a passive peering session for listening. The no version of this command disables a passive peering session. Example OS10(conf-router-template)# listen 1.1.0.0/16 limit 4 Supported Releases 10.2.0E or later local-as Configures a local AS number for a peer. Syntax Parameters local-as as-number [no-prepend] • as-number-Enter the local AS number, from 1 to 4294967295. • no-prepend-(Optional) Enter so that local AS values are not prepended to the AS_PATH attribute. Default Disabled Command Mode ROUTER-NEIGHBOR or ROUTER-TEMPLATE Usage Information Facilitates the BGP network migration operation and allows you to maintain existing AS numbers. The no version of this command resets the value to the default. The no local-as command deletes the local-as configuration. Example (Neighbor) OS10(conf-router-bgp-10)# neighbor lunar OS10(conf-router-neighbor)# local-as 20 Example (Template) OS10(conf-router-bgp-10)# template solar OS10(conf-router-template)# local-as 20 Example (Replace AS) OS10(conf-router-bgp-10)# neighbor SJC OS10(conf-router-template)# local-as 20 no-prepend replace-as Supported Releases 10.3.0E or later log-neighbor-changes Enables logging for changes in neighbor status. Syntax Parameters Default Command Mode log-neighbor-changes None Enabled ROUTER-BGP 558 Layer 3