Dell MX9116n EMC SmartFabric OS10 User Guide - Page 36

image cancel Cancels an image or firmware file download that is in progress. Syntax image cancel Parameters None Default Not configured Command Mode EXEC Usage Information The image cancel command cancels a file download from a server, such as an OS10 binary image or firmware upgrade, that is in progress. After an image download completes, the command has no effect. The command also removes any pending firmware upgrades on the switch. Example OS10# image cancel Supported Releases 10.2.0E or later image copy Copies the entire image in the active partition to the standby partition, a mirror image. Syntax image copy active-to-standby Parameters active-to-standby - Enter to copy the entire image in the active partition to the standby partition, a mirror image. Default Not configured Command Mode EXEC Usage Information Duplicate the active, running software image to the standby image location. Example OS10# image copy active-to-standby Supported Releases 10.2.0E or later image download Downloads a new software image or firmware file to the local file system. Syntax Parameters image download file-url file-url - Enter the URL of the image file: • ftp://userid:passwd@hostip:/filepath - Enter the path to copy from the remote FTP server. • http[s]://hostip:/filepath - Enter the path to copy from the remote HTTP or HTTPS server. • scp://userid:passwd@hostip:/filepath - Enter the path to copy from the remote SCP file system. • sftp://userid:passwd@hostip:/filepath - Enter the path to copy from the remote SFTP file system. • tftp://hostip:/filepath - Enter the path to copy from the remote TFTP file system. • usb://filepath - Enter the path to copy from the USB file system. Default Not configured Command Mode EXEC Usage Information The image download command downloads image files to the image directory. Use the dir image command to display the contents of the image directory. OS10 SW image files are large, and occupy a significant amount of disk space. Dell EMC Networking recommends that you remove unnecessary image files from the image directory by using the delete command; for example: delete image://OS10EE-10.2.0.bin 36 Getting Started