Dell MX9116n EMC SmartFabric OS10 User Guide - Page 575

timers Adjusts BGP keepalive and holdtime timers. Syntax Parameters timers keepalive holdtime • keepalive-Enter the time interval, in seconds, between keepalive messages sent to the neighbor routers, from 1 to 65535. • holdtime-Enter the time interval, in seconds, between the last keepalive message and declaring a router dead, from 3 to 65535. Default keepalive 60 seconds; holdtime 180 seconds Command Mode ROUTER-BGP Usage Information The configured timer value becomes effective after a BGP hard reset. The timer values negotiate from peers. The no version of this command resets the value to the default. Example OS10(conf-router-bgp)# timers 30 90 Supported Releases 10.3.0E or later vrf Enters the CONFIG-ROUTER-VRF command mode. Syntax vrf vrf-name Parameters None Default None Command Mode ROUTER-BGP Usage Information This mode allows you to apply BGP configurations to nondefault VRFs. Example OS10(config)#router bgp 100 OS10(config-router-bgp-100)# OS10(config-router-bgp-100)#vrf vrf_test1 OS10(config-router-bgp-100-vrf)# Supported Releases 10.3.0E or later weight Assigns a default weight for routes from the neighbor interfaces. Syntax weight number Parameters number-Enter a number as the weight for routes, from 1 to 4294967295. Default 0 Command Mode ROUTER-BGP-NEIGHBOR Usage Information The path with the highest weight value is preferred in the best-path selection process. The no version of this command resets the value to the default. Example OS10(conf-router-bgp-neighbor)# weight 4096 Supported Releases 10.3.0E or later Layer 3 575