Dell MX9116n EMC SmartFabric OS10 User Guide - Page 951

• route-map - Accesses route-map mode. • router - Accesses router-bgp and router-ospf modes. • line - Accesses line-vty mode. • priv-lvl privilege-level - Enter the number of a privilege level, from 2 to 14. • command-string - Enter the commands supported at the privilege level. Defaults Not configured Command Mode CONFIGURATION Usage Information For users assigned to sysadmin, netadmin, and secadmin roles, you cannot configure a privilege level less than 2. If a command that you associate with a privilege level has a space, enter the command in double quotes ("). If a command does not have a space or if it has keywords separated by a hyphen, double quotes are not required. The no version of this command removes a command from a privilege level. Example OS10(config)# privilege exec priv-lvl 3 "configure terminal" OS10(config)# privilege configure priv-lvl 3 "interface ethernet" OS10(config)# privilege interface priv-lvl "ip address" OS10(config)# privilege configure priv-lvl 3 route-map OS10(config)# privilege route-map priv-lvl 3 "set local-preference" Supported Releases 10.4.3.0 or later radius-server host Configures a RADIUS server and the key used to authenticate the switch on the server. Syntax Parameters radius-server host {hostname | ip-address} key {0 authentication-key | 9 authentication-key | authentication-key} [auth-port port-number] • hostname - Enter the host name of the RADIUS server. • ip-address - Enter the IPv4 (A.B.C.D) or IPv6 (x:x:x:x::x) address of the RADIUS server. • key 0 authentication-key - Enter an authentication key in plain text. A maximum of 42 characters. • key 9 authentication-key - Enter an authentication key in encrypted format. A maximum of 128 characters. • authentication-key - Enter an authentication in plain text. A maximum of 42 characters. It is not necessary to enter 0 before the key. • auth-port port-number - (Optional) Enter the UDP port number used on the server for authentication, from 0 to 65535, default 1812. Default Not configured Command Mode CONFIGURATION Usage Information The authentication key must match the key configured on the RADIUS server. You cannot enter spaces in the key. The show running-configuration output displays both unencrypted and encrypted keys in encrypted format. Configure global settings for the timeout and retransmit attempts allowed on RADIUS servers using the radius-server retransmit and radius-server timeout commands. Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S). Also supported in SmartFabric mode starting in release 10.5.0.1. The no version of this command removes a RADIUS server configuration. Example OS10(config)# radius-server host 1.5.6.4 key secret1 Supported Releases 10.2.0E or later Security 951