Dell MX9116n EMC SmartFabric OS10 User Guide - Page 980

Successfully created certificate file /home/admin/cert2.pem and key Supported releases 10.4.3.0 or later crypto cert install Installs a host certificate and private key on the switch. A host certificate may be trusted from a CA or self-signed. Syntax Parameters crypto cert install cert-file cert-path key-file {key-path | private} [password passphrase] [fips] • cert-file cert-path - Enter the local path to where the downloaded certificate is stored. You can enter a full path or a relative path; for example, home://s4048-001-cert.pem or usb://s4048-001cert.pem or flash://certs/s4810-001-request.crt. • key-file {key-path | private} - Enter the local path to retrieve the downloaded or locally generated private key. Specify a key-path to install the key from a local directory. Enter private to install the key from a local hidden location. After the certificate is successfully installed, the private key is deleted from the specified key-path location and copied to the hidden location. • password passphrase - (Optional) Enter the password used to decrypt the private key if it was generated using a password. • fips - (Optional) Install the certificate-key pair as FIPS-compliant. Enter fips to install a certificate-key pair that a FIPS-aware application, such as RADIUS over TLS, uses. If you do not enter fips, the certificatekey pair is stored as a non-FIPS compliant pair. Default Not configured Command mode EXEC Usage information Before using the crypto cert install command, copy a CA-signed certificate to the home directory on the switch using a secure connection, such as HTTPS, SCP, or SFTP, and (optionally) the private key. To delete a trusted certificate, use the crypto cert delete command. A successful installation of a trusted certificate requires that: • The downloaded certificate is correctly formatted. • The downloaded certificate's public key corresponds to the private key. You can assign an installed certificate-key pair to a security profile by entering the file name of the certificate without an extension. It is possible to store a certificate in either FIPS mode or non-FIPS mode on the switch, but not in both modes, using the crypto cert install command and the optional fips option. You must ensure that certificates installed in FIPS mode are compliant with the FIPS 140-2 standard. Example OS10# crypto cert install cert-file home://Dell_host1_CA1.pem key-file home://Dell_host1_CA1.key Processing certificate ... Certificate and keys were successfully installed as "Dell_host1_CA1.pem" that may be used in a security profile. CN = Dell_host1_CA1. Supported releases 10.4.3.0 or later crypto crl delete Deletes a Certificate Revocation List file in the trust store on the switch. Syntax Parameters crypto crl delete crl-filename • crl-filename - Enter a CRL filename with the .pem extension as displayed under Manually installed CRLs in show crypto crl output. Default Not configured 980 Security