Dell MX9116n EMC SmartFabric OS10 User Guide - Page 424

Example When the option is disabled, the port is not shut down but moved to BLOCKING state whenever there is a BPDU guard violation. In this case, the port is operationally DOWN in spanning-tree mode and when the recovery timer expires, the port is UP irrespective of the recovery cause configuration. The no version of the command disables the detect cause option. OS10(config)# errdisable detect cause bpduguard Supported Releases 10.4.2.0 or later errdisable recovery cause bpduguard Enables to recover the ports shut down due to BPDU Guard violation. Syntax errdisable recovery cause bpduguard Parameters None Default Disabled Command Mode CONFIGURATION Usage Information This command applies only to STP-enabled ports. The command takes effect only when BPDU guard is configured on a port and errdisable detect cause bpduguardis enabled on the port. When the recovery option is enabled, the port is brought up after the recovery timer expires. When the recovery option is disabled, the port is shut down indefinitely. You must manually bring up the port using the shutdown and no shutdown commands. The no version of the command disables the recovery option. Example OS10(config)# errdisable recovery cause bpduguard Supported Releases 10.4.2.0 or later errdisable recovery interval Configures recovery interval timer to delay the recovery of ports when there is a BPDU Guard violation. Syntax errdisable recovery interval interval-value Parameters interval-value-Enter the time interval in seconds. The range is from 30 to 65535. Default 300 seconds Command Mode CONFIGURATION Usage Information This command applies only to STP-enabled ports. The command takes effect only when the BPDU guard is configured on a port. The recovery timer starts whenever there is a BPDU guard violation. The no version of the command resets the timer to the default value. Example OS10(config)# errdisable recovery interval 45 Supported Releases 10.4.2.0 or later 424 Layer 2