Dell MX9116n EMC SmartFabric OS10 User Guide - Page 84

Default Not configured Command Mode EXEC Usage Information None Example OS10# unlock Supported Releases 10.2.0E or later username password role Creates an authentication entry based on a user name and password, and assigns a role to the user. Syntax Parameters username username password password role role [priv-lvl privilege-level] • username username-Enter a text string. A maximum of 32 alphanumeric characters; one character minimum. • password password-Enter a text string. A maximum of 32 alphanumeric characters; nine characters minimum. Password prefixes $1$, $5$, and$6$ are not supported in clear-text passwords. • role role-Enter a user role: • sysadmin - Full access to all commands in the system, exclusive access to commands that manipulate the file system, and access to the system shell. A system administrator can create user IDs and user roles. • secadmin - Full access to configuration commands that set security policy and system access, such as password strength, AAA authorization, and cryptographic keys. A security administrator can display security information, such as cryptographic keys, login statistics, and log information. • netadmin - Full access to configuration commands that manage traffic flowing through the switch, such as routes, interfaces, and ACLs. A network administrator cannot access configuration commands for security features or view security information. • netoperator - Access to EXEC mode to view the current configuration. A network operator cannot modify any configuration setting on a switch. • priv-lvl privilege-level - Enter a privilege level, from 0 to 15. If you do not specify the privlvl option, the system assigns privilege level 1 for the netoperator role and privilege level 15 for the sysadmin, secadmin, and netadmin roles. Default • User name and password entries are in clear text. • There is no default user role. • The default privilege levels are level 1 for netoperator, and level 15 for sysadmin, secadmin, and netadmin. Command Mode CONFIGURATION Usage Information By default, the password must be at least nine alphanumeric characters. Only the following special characters are supported: Example Enter the password in clear text. It is converted to SHA-512 format in the running configuration. For backward compatibility with OS10 releases 10.3.1E and earlier, passwords entered in MD-5, SHA-256, and SHA-512 format are supported. You cannot assign a privilege level higher than privilege level 1 to a user with the netoperator role and higher than privilege level 2 for a sysadmin, secadmin, and netadmin roles. To increase the required password strength, use the password-attributes command. The no version of this command deletes the authentication for a user. Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S). Also supported in SmartFabric mode starting in release 10.5.0.1. OS10(config)# username user05 password newpwd404 role sysadmin priv-lvl 10 84 CLI Basics